Solid carbide slitting saw are recommended for slotting the fragile and hard materials. A tooth form is suitable especially for thin saw blades with tooth pitch from 0,8 mm to 3,0 mm. Cutting edge is very sharp. Chip clearance is reduced and it cannot remove longer chips away from the cutting area efficiently. Solid carbide slitting saws in both high speed and super high speed steels suitable for milling, and grooving steels and alloys on manual, semi-automatic and fully automatic machines.
Precision screw-slotting saws – tooth form “A” Circular saws
In both high speed and super high speed steel suitable for slotting screws in all types of steels and alloys. The solid carbide slitting saw blades are all flat ground (without hub) and the entire range is executed with tooth form “A”. The saw blade range is ø 80 mm, ø 100 mm and ø 125 mm. Blade thicknesses range from 0,7 mm – 2 mm in decimal increments.
Precision saws for jewelry – tooth form “A” Circular saws
In both high speed and super high speed steel suitable for goldsmith´s cutting and machining purposes. The solid carbide slitting saw blades are all with hollow ground (with a hub) and the entire range is executed with tooth pitches finer than 1 millimetre.
Precision saws for tube-cutters – tooth form “Bw” Circular saws
in both high speed and super high steel suitable for cutting tubes sized ø 10 mm – ø 325 mm, with wall thickness ranging 2 mm – 10 mm, in both standard steels and high alloy steels (stainless). The solid carbide slitting saw blade range is ø 63 mm, ø 68 mm and ø 75 mm. Blade thicknesses are 1,2 mm, 1,6 mm and 2,0 mm and the tooth form is “Bw”.