Expand your sanding and grinding capabilites with tungsten carbide disc for PCBN&PCD substrate Set. Four exciting and exclusive 2”(50mm) flat profile carbide disc for PCBN&PCD substrate, with tungsten carbide surfaces on the front, edge and back, from extreme coarse to fine grit are part.
All carbide disc for PCBN&PCD substrate feature All Surface 3 Edge Tungsten Carbide, have a 2” (50mm) diameter x 10mm center and fit out miniature angle grinder that is a must have for your wood working and wood turning projects. The carbide disc for PCBN&PCD substrate also work well with higher powered, single speed mini grinders but you get tremendous control with our variable speed Merlin2®.
The great feature about all these four carbide disc for PCBN&PCD substrate is their ability to cut on all sides at the same time. On their face like sandpaper, on edge, like a saw or blade, on the back, like you haven’t experienced before! and plunge cutting, then using the front and back of the carbide disc for PCBN&PCD substrate to smooth the opposite sides of the wood e.g. spiral cuts on woodturning.